USER MANUAL 750000992/16
6-9
MTS
e
OTS Results Window
• The selected threshold cursor showing the current threshold in dB. Pressing
the ← and → directional arrows modifies this value.
• The icon that indicates an audible alarm will be given if the measured
power passes the selected threshold.
• The AUTOLAMBDA indicator shows that the automatic selection of the
same wavelength as the source when a send lambda signal is received.
• The AUTORANGE indicator shows that the optimal measurement range will
be used to measure the received light power.
• The AUTOSTORE indicator shows that measurement results will be
automatically saved when the
START/STOP direct access key is pressed and
the RUN indicator is on.
• The AUTOPRINT indicator shows that measurement results will be printed
when the
START/STOP direct access key is pressed and the RUN indicator is
on.
• The REALTIME indicator shows that the real time mode is selected and the
measured value displayed is being made in real time rather than as an
averaged measurement.
• ATTENUATION INCLUDED if a value has been selected on the Ext.
Attenuator line of the Tes t S e tup menu (Radiometer).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
