I-4
USER MANUAL 750000992/16
Index MTS
e
abbreviation of command header
9-4
command errors 9-3
command format 9-3
command syntax 9-4
commands relative to module 9-8
commands relative to the keys 9-8
commands relative to the OTS 9-
19, 9-23
common part commands 9-5
connecting MTS to a PC 9-1
description of commands 9-3
description of queries 9-3
fiber commands 9-15
laser source set-up 9-20
linking commands 9-4
parameters 9-4
power meter set-up 9-19
queries 9-4
reading OTDR result commands
9-16
reading OTS results 9-21
result commands 9-13
SRQ commands 9-5
status commands 9-7
status structure registers 9-6
system setup commands 9-7
Reseting the MTS
3-8
Resolution 5-3, 11-4
Result commands
9-13
Results
analysis (OTDR)
5-14
light source 6-5
on trace 5-5
OTDR screen 4-3
powermeter 6-8
powermeter (automatic storage)
6-15
WDM 7-5
RS 232 3-17, 4-10
connection to the interface
9-1
S
Screen
adjusting contrast 3-13
auto off 3-14
back-lighting level 3-14
options 4-2
trace background color 3-14
Setup
instrument setup
2-2, 3-11
light source setup 6-2
OTDR test setup 5-1
OTS test setup 6-1
powermeter setup 6-3
system setup 2-2
test setup 2-2
WDM setup 7-2
Shift
active trace
5-31
of OTDR trace 5-15
Slope Method 5-4
Software
MTS (installation)
3-9
WinTrace 11-8
WS-FTP Pro 11-8
Source (OTS)
modulated signal
6-13
scanning mode 6-12
specification 11-5
Specifications 11-1
SRQ commands
9-5
Status commands
9-7
Status structure registers
comman part commands
9-6
Storage
media
8-1
OTDR & OTS data 8-2
OTS automatic storage 6-15
Swapping overlay traces 5-30
Switching on
3-8
T
Table of results 5-17
confidence 5-20
contents 5-18
loading an OTS table 8-20
Talkset
specifications
11-15
use 3-28
Threshold
audible alarm (OTS)
6-17
end fiber 5-4
reflectance 5-4
slope 5-4
splice 5-4
Time 3-15
acq. time
5-3
real time (OTS) 6-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
