Actiforce STEELFORCE PRO SLS SERIES User Manual

English
Deutsch
Nederlands
SLS-IM0015-1EN-DE-NL
STEELFORCE PRO SLS SERIES
270 / 470 / 670
Assembly Manual
Read this manual thoroughly and store in a safe place.
Montageanleitung
Bitte sorgfältig lesen und sicher aufbewahren.
Montagehandleiding
Lees deze handleiding aandachtig door en bewaar deze goed.
ONCE PRINTED CONSIDER REFERENCE

Actiforce STEELFORCE PRO SLS SERIES Specifications

General

Brand	Actiforce
Model	STEELFORCE PRO SLS SERIES
Category	Racks & Stands
Language	English

Summary

General

Local value of the assembly/Operating Manual

Importance of manual for safe assembly and operation.

Intended use

Defines use as height-adjustable office workstation.

Improper use

Prohibits lifting people/loads or home use.

Grounding Instruction

Essential steps for safe electrical grounding.

Danger

Warns about electric shock from improper grounding.

Safety Information

Symbols/Warnings

Explains danger and warning symbols used in the manual.

Symbols used on the workstation frame

Warns against placing body parts under the frame.

Maximum weight allowed on frame

Specifies maximum load limits for the frame.

Maximum weight allowed per column

Specifies maximum load limit per column.

Organizational measures

Recommends two people for assembly and turning.

Informal safety measures

Keeping manual accessible and safety info legible.

Note for those assembling the workstation

Age and knowledge requirements for assembly personnel.

Transport and assembly

Guidelines for moving and assembling the frame safely.

Use of the workstation frame

Safe usage guidelines, avoiding child misuse.

Specific dangers

Highlights dangers during height adjustment and proximity.

In an emergency

Actions to take if unusual events occur.

Maintenance and upkeep

Instructions for maintenance, repairs, and component replacement.

Cleaning

Recommended schedule and method for cleaning.

Persistent risks

General statement on residual risks despite safety measures.

Assembly

Content Box

Lists all included parts and hardware for assembly.

Pre-assembly of the Crossbars

Steps for preparing the crossbars before main assembly.

Recommended Top Sizes

Table showing recommended table top dimensions.

Mounting the Feet

Step-by-step guide for attaching the feet to the frame.

Mounting the Crossbar

Instructions for attaching the crossbar between the legs.

Mounting the Top Support

Steps for attaching the top support to the frame.

Adjustment of the Frame Width

How to adjust frame width and tighten screws.

Mounting the Spacers

Instructions for attaching the spacers.

Mounting the Cable Clips

Steps for installing the cable clips.

Connecting the Electrical Components

Guide to connecting control units and cables.

Mounting the table top

Instructions for attaching the table top to the frame.

Mounting the power supply underneath the table top

How to install the power supply unit under the tabletop.

Mounting the Wire Clip

Steps for attaching wire clips to manage cables.

Clearance around the wall or moving parts 25mm of the table

Specifies minimum clearance required around the table.

Frame test without table top

Instructions for testing frame movement and reset mode.

Functions of the Memory Master (Optional)

Explains use of optional memory master for height adjustment.

Correct Position of Seat

Technical Specification

Operation and Indicators

Indicators

Explains what different indicators might signify.

Troubleshooting

Customer Service

How to contact customer service for support.

Manufacturer

Contact details for the manufacturer.

Recycling

Instructions for taking the workstation out of service and recycling.

Certifications