ACTION ELECTRONICS P40E - Testing and Calibration Guide; Testing with Test Servos (Mode 1)

COMMAND
STOP STOP
FWDFWD
REV REV
STOP FWD
FWD STOP
STOP REV
REV STOP
Port Stbd Port StbdMotor Steering
SETTING UP ACTION MARINE MIXER USING TEST SERVOSP40E
Set two on-board switches to ON and ON (Mode 1)
FULL ASTERN
+
HARD TO PORT
FULL ASTERN
+
HARD TO STBD
FULL AHEAD
+
HARD TO STBD
FULL AHEAD
+
HARD TO PORT
DEAD STOP
+
NO RUDDER
FULL AHEAD
+
NO RUDDER
FULL ASTERN
+
NO RUDDER
Tx stick positions Test servo disc positions
Prop direction/speed