© 2008 Qwest Communications International Inc.
How to Troubleshoot Wireless Internet Access (Wi-Fi) on the Qwest® Standard Modem:
Actiontec® GT701-WG
Internet Service Provider (ISP):
All
Use this document if:
You want to change one or more of the following settings to troubleshoot your Qwest Standard
Modem: Actiontec GT701-WG for wireless issues:
1. Reset your modem to factory defaults (Step 1)
2. Reprogram your modem (Step 7)
3. Change your SSID or Network Name (Step 16)
4. Change your Security Key (Step 18)
5. Change the Wireless Channel (Step 21)
This document assumes:
That you have your PPP username and password that was provided by your Internet
Service Provider (ISP). Click here to look up your ISP’s contact information.
Your computer is directly connected to the modem using an Ethernet cable.
The Qwest Standard Modem: Actiontec GT701-WG is powered on.
To Next Page
Need help?
General
