4x4 802.11ac Wireless
Network Extender
Model # WEB6000Q
Manual Conguration of the Extender’s
Wi-Fi Settings
©2015 Actiontec Electronics, Inc. Actiontec, Creative Solutions for the Digital Life, and
the Actiontec logo are registered trademarks or trademarks of Actiontec Electronics,
Inc. Incorportated in the U.S. or other countries. All other names are properties of their
respective owners.
Product photo may dier from actual product. However, functionality remains as stated above.
Specications are subject to change without notice.
NEXT
Quick Start Guide
This Quick Start Guide will walk you through the easy steps to add
802.11ac Wi-Fi capabilities to your Wi-Fi network.
Here is what’s included:
•
(1) WEB6000Q Wireless
Network Extender
•
(1) Power Adapter
(External, 12V DC, 2A
made by Actiontec,
Model# WA-24Q12FU)
•
(1) Ethernet Cable
Step
1 Use a laptop, tablet or other device to login into your Wi-Fi
Router. (If you do not know how to do this, please see the documenta-
tion for your Wi-Fi Router.)
Step
2 Find the list of devices that are connected to your Router. This
is usually found on the main screen after logging into your Router or
under a Status Tab.
Step
3 Find a device with the name WEB6000Q. If you cannot nd
a device with that name, please look for a device that has the same Mac
address as the Extender.
Step
4 Write down the IP address of the Wi-Fi Network Extender
here: _______________________.
Step
5 Open a web browser, and type in the IP address that you
wrote down under Step 4.
Step
7 Click on the Wireless Setup icon.
Step
8 Select the W-Fi band that you want to rename. Make the
adjustments and save your changes.
Step
6 Once the Home Screen appears, login into the Extender
with the user name and password found on the label on the back of the
Extender.
To Next Page
Need help?
General
