Use a small Phillips-head
screwdriver to remove the two
screws. Remove the lens from the
license plate assembly.
The courtesy lights in the doors and
roof come apart the same way. They
do not use the same type of bulb.
Removethelensbycarefully
prying on the edge of the lens with
a fingernail file or a small flat-tip
screwdriver. Do not pry on the
edge of the housing around the
lens.
Remove the bulb by pulling it
straight out. Push the new bulb
into the socket.
Put the lens back in place and
tighten the two screws securely.
1.
2.
3.
1.
Replacing a Rear License Plate
Bulb
Replacing Bulbs in the Interior
Courtesy Lights
Lights
Maintenance
258
SSCCRREEWWSS
CCEEIILLIINNGG LLIIGGHHTT
To Next Page
Loading...
