Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
Before mounting the spare tire,
wipeanydirtoffthemounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully,itmaybehotfrom
driving.
Lower the car to the ground and
remove the jack.
12.
13. 14.
Taking Care of the Unexpected
Changing a Flat Tire
262
BBRRAAKKEE HHUUBB
To Next Page
Loading...
