Removethelensbycarefully
prying on the edge of the lens with
a fingernail file or a small flat-tip
screwdriver. Do not pry on the
edge of the housing around the
lens.
Remove the bulb by pulling it
straight out of its metal tabs.
Push the new bulb into the metal
tabs. Snap the lens back in place.
Remove the cargo area light
assembly by carefully prying on
the left edge of the lens with a flat-
tip screwdriver and pulling the
assembly out.
Open the hatch.
1.
2.
3.
1.
2.
Lights
Maintenance
Replacing a Ceiling Light Bulb Replacing a Cargo Area Light
Bulb
250
BULB
BULB
To Next Page
Loading...
