Even with the cruise control turned
on, you can still use the accelerator
pedal to speed up for passing. After
completing the pass, take your foot
off the accelerator pedal. The vehicle
will return to the set cruising speed.
Resting your foot on the brake or
clutch pedal will cause the cruise
control to cancel.
Youcancancelthecruisecontrolin
any of these ways:
Tap the brake or clutch pedal.
Press the SET/decel and
RESUME/accel buttons at the
same time.
Press the Cruise Control Master
Switch.
When you tap the brake or clutch
pedal, or press the SET and
RESUME buttons at the same time,
the CRUISE CONTROL indicator on
the instrument panel will go out and
the vehicle will begin to slow down.
You can use the accelerator pedal in
the normal way. Pressing the Cruise Control Master
Switch turns the system completely
off and erases the previous cruising
speed from memory. To use the
system again, refer to
.
If you use the brake or clutch pedal
to cancel cruise control, the system
remembers the previously-set
cruising speed. To return to that
speed, accelerate to above 25 mph
(40 km/h), then press the
RESUME/accel button. The
CRUISE CONTROL indicator comes
on, and the vehicle will accelerate to
thesamecruisingspeedasbefore.
Cruise Control
Cancelling the Cruise Control
Using the
Cruise Control
Comfort and Convenience Features
102
To Next Page
Loading...
Need help?
General
