Look at the coolant level in the
expansion tank. Make sure it is
between the MAX and MIN lines. If
it is below the MIN line, see
on page for
information on adding the proper
coolant.
Refer to
on page for information
on checking other items in your
Acura.
Park the vehicle, and set the
parking brake. Pull the hood
release handle located under the
lower left corner of the dashboard.
The hood will pop up slightly.
1.
146
136
Service Station Procedures
Engine Coolant Check
Adding
Engine Coolant
Owner Maintenance
Checks
Checking the Front Compartment
Before Driving
108
EXPANSION TANK
MAX
MIN
HOOD RELEASE HANDLE
To Next Page
Loading...
Need help?
General
