This switch is on the dashboard
behind the right control pod. It lets
youturntheTractionControl
System on and off. You cannot turn
off the TCS while the TCS indicator
is flashing.
Deactivate the system by pressing
the TCS On/Off switch. The TCS
indicator light comes on as a
reminder. Pressing the switch again
turns the system back on.
The Traction Control System turns
on every time you start the engine,
even if you turned it off the last time
you drove the vehicle.
The TCS indicator comes on or
flashes under the following condi-
tions:
When you turn the ignition switch
to ON (II).
When you manually turn off TCS.
It flashes when the TCS is
regulating the engine output to
prevent wheelspin.
If the system’s diagnostics senses
a problem with TCS, the indicator
will come on and stay on.
If the TCS indicator comes on while
driving, pull to the side of the road
when it is safe and turn off the
engine. Reset the system by
restarting the engine, and watch the
TCS indicator. If the indicator
remains on, or comes back on while
driving, have the TCS inspected by
your Acura dealer. You can still drive
the vehicle without TCS.
The TCS indicator may occasionally
come on for one or two seconds and
then go out. This is normal.
Your NSX is not designed to tow a
trailer. Attempting to do so can void
your warranties.
TCS ON/OFF Switch
TCS Indicator
Towing a Trailer
Driving
Traction Control System (TCS), Towing a Trailer
132
TCS INDICATOR LIGHT
TCS ON/OFF SWITCH
To Next Page
Loading...
Need help?
General
