Put the rubber cap back on the
valve cap. Screw the valve cap
back on the folding spare tire
valve.
Removethefoldingsparetireand
install the original tire and wheel
nuts. Lower the vehicle and
tighten the wheel nuts securely in
a crisscross pattern.
Tighten to:
Store the folding spare tire in the
front compartment with the
outside surface of the wheel
contacting the bracket of the
spare tire well. Securely tighten
the wing bolt.
5. 6. 7.
Changing a Flat Tire
Taking Care of the Unexpected
180
VALVE CAP
1
43
52
80 lbf·ft (108 N·m , 11 kgf·m)
To Next Page
Loading...
