Shift to Park or Neutral and set
the parking brake. Pull the hood
release handle located under the
lower left corner of the dashboard.
The hood will pop up slightly.
Push the fuel fill door closed until
it latches.
Standing in front of the vehicle,
reach in between the hood and the
front bumper with your finger.
Slide the latch handle.
Screw the fuel fill cap back on,
tighten it until it clicks at least
three times. If you do not properly
tighten the cap, the Malfunction
Indicator Lamp may come on (see
page ).
1. 2.
5.
6.
323
Service Station Procedures
Before Driving
Opening the Hood
206
HOOD RELEASE HANDLE
LATCH HANDLE
To Next Page
Loading...
