▲▼
To exit AUTO LIGHT SENSITIVITY
without changing the current setting,
select EXIT by pressing the INFO
( / ) button, then press the SEL/
RESET button. The screen goes
back to CUSTOMIZE MENU.
When your choice is set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.
If your choice not set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY. If this
happens, you need to repeat the
headlight auto light sensitivity setup.
Multi-Information Display
118
To Next Page
Loading...
