When the CMBS is on, the radar
sensor constantly scans for vehicles
ahead of you. This means that
driving on a road with a few or no
vehicles could cause a CHECK
CMBS RADAR SENSOR message to
appear on the multi-information
display. This is normal and not a
cause for concern.
The radar sensor may not always
scan as intended. Here are two
examples:
Thetiresarenotcorrectly
maintained. Always make sure the
tire pressures are correct (see
page ), and that the tires are
the correct size and in good
condition (see Tires on page ).
Your vehicle is tilted because of a
heavy load in the rear or from
modifications to the suspension.
Do not overload your vehicle (see
Carrying Cargo on page ), and
do not make any modifications to
the suspension (see Accessories
and Modifications on page ).
305
303
384
384
Collision Mitigation Brake System (CMBS)
Driving
327
To Next Page
Loading...
