▼▲
▼▲
And also, the percentage ‘‘0’’ keeps
blinking on the display.
If the indicated required service is
not done and the remaining engine
oil life becomes 0 %, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
thetotalmileageaftertheremaining
oillifebecame0%,andthe
maintenance item code.
This message is displayed when you
drive over 10 miles (for U.S. models)
or 10 km (for Canadian models)
after seeing the 0 % message.
Immediately have the service
performed, and make sure to reset
the display as previously described.
The maximum total mileage shown
with this message is ‘‘999 mile (for
U.S. models) or 999 km (for
Canadian models)’’.
The message will be canceled if the
or buttononthesteeringwheel
is pressed. Press the or button
to see the message again.
This particular message is displayed
whenthemileageaftertheengineoil
lifebecame0%reaches10miles(for
U.S. models)/10 km (for Canadian
models).
Maintenance Minder
354
MAINTENANCE CODE
CANADA
U.S.
TOTAL PAST DUE MILEAGE
To Next Page
Loading...
