▲▼
▲
▼
▲▼
▲▼
There are two position setups you
can make:
MEMORY POSITION LINK
AUTO TILT & TELESCOPIC
While the multi-information display
is in the CUSTOMIZE GROUP
screen, select POSITION SETUP by
pressing the INFO ( / ) button,
and then press the SEL/RESET
button.
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
CONTINUED
Position Setup
Multi-Information Display
Instruments and Controls
103
Press the or button.
Press the SEL/RESET button.
seepage104
seepage106
０７／０５／１７ ０８：５７：２２ ３１ＳＪＡ６３０ ０１０８
To Next Page
Loading...
