The outside mirrors are heated to
remove fog and frost. With the
ignition switch in the ON (II)
position, turn on the heaters by
pressing the button. The indicator in
the button comes on as a reminder.
Press the button again to turn the
heaters off.
With the ignition switch in the ON
(II) position, move the selector
switch to the L (driver’s side), or R
(passenger’s side).
Push the edge of the adjustment
switch to move the mirror right,
left, up, or down.
When finished, move the selector
switch back to the center (off)
position.
Both outside door mirrors have a
reverse tilt feature. When in
reverse, the selected mirror will
tilt down slightly to improve your
view as you parallel park. Shifting
out of reverse will return the
mirrors to their original position.
To tilt the driver’s mirror, place
the selector switch in the left
position.
To tilt the passenger’s mirror,
place the switch in the right
position.
To turn the feature off, place the
switch in the center position.
Outside mirror positions can be
stored in the driving position
memory system (see page ).
3.
1.
2.
108
Power Mirror HeatersAdjusting the Power Mirrors
Mirrors
Reverse Tilt Door Mirror
Instruments and Controls
107
HEATED MIRROR BUTTON
SELECTOR SWITCH
ADJUSTMENT
SWITCH
０７／０６／１２ １７：０６：２４ ３１ＳＥＰ６４０ ０１１２
To Next Page
Loading...
