To apply the parking brake, pull the
lever up fully. To release it, pull up
slightly, push the button, and lower
the lever. The parking brake
indicator on the instrument panel
should go out when the parking
brake is fully released (see page ).
You will also see a ‘‘RELEASE
PARKING BRAKE’’ message on the
multi-information display (see page
).
59
68
Parking Brake
Instruments and Controls
117
Driving the vehicle with the parking
brake applied can damage the rear
brakes and axles. A beeper will sound
if the vehicle is driven with the parking
brake on.
０７／０６／１２ １７：０７：４７ ３１ＳＥＰ６４０ ０１２２
To Next Page
Loading...
