Check the brake fluid level in the
reservoir monthly after removing the
engine compartment rear cover (see
page ).
Replace the brake fluid when this
service is indicated on a maintenance
message in the multi-information
display.
Always use Honda Heavy Duty
Brake Fluid DOT 3. If it is not
available, you should use only DOT 3
or DOT 4 fluid, from a sealed
container, as a temporary
replacement.
The fluid level should be between
theMINandMAXmarksontheside
of the reservoir. If the level is at or
below the MIN mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads.
Using any non-Honda brake fluid can
cause corrosion and decrease the life
of the system. Have the brake
system flushed and refilled with
Honda Heavy Duty Brake Fluid
DOT 3 as soon as possible.
Brake fluid marked DOT 5 is not
compatible with your vehicle’s
braking system and can cause
extensive damage.
286
Brake and Clutch Fluid
Brake Fluid Brake System
Maintenance
295
MAX
MIN
０７／０６／１２ １７：３１：１７ ３１ＳＥＰ６４０ ０３００
To Next Page
Loading...
