Improperly replacing
or covering front seat-back covers
can prevent your side airbags from
inflating during a side impact.
This could make the
driver’s seat position sensor or the
front passenger’s weight sensors
ineffective. If it is necessary to
remove or modify a front seat to
accommodate a person with
disabilities, first contact Acura
Client Services at 800-382-2238.
Together, airbags and
seat belts provide the best
protection.
Tampering could cause
the airbags to deploy, possibly
causing very serious injury.
If water or
another liquid soaks into a seat-
back, it can prevent the side airbag
cutoff system from working
properly.
Even if your
airbags do not inflate, your dealer
should inspect the driver’s seat
position sensor, the front
passenger’s weight sensors, the
front seat belt tensioners, and all
seat belts worn during a crash to
make sure they are operating
properly.
Additional Information About Your Airbags
Do not cover or replace front seat-
back covers without consulting
your dealer.
Do not remove or modify a front
seat without consulting your
dealer.
Donotattempttodeactivateyour
airbags.
Do not tamper with airbag
components or wiring for any
reason.
Do not expose the front passenger’s
seat-back to liquid.
If your vehicle has a moderate to
severe impact.
Additional Safety Precautions
32
０７／０６／１２ １６：５６：２５ ３１ＳＥＰ６４０ ００３７
To Next Page
Loading...
