Wiper Setup
Here is one custom setting for the
wiper setup:
●
WIPER ACTION
While ‘‘WIPER SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
Each time you press the INFO
(▲/▼) button, the screen changes
as shown in the illustration. Press the
INFO (▲/▼) button until you see
the setting you want to customize,
then press the SEL/RESET button to
enter your selection.
Wiper Action
You can select from these two
settings when the wiper switch is in
the INT (intermittent) position:
INTERMITTENT － The
intermittent operation varies
according to the selection you make
on the wiper lever's intermittent
control ring.
WITH VEH SPD － The intermittent
operation varies according to vehicle
speed.
INFO (▲/▼)
BUTTON
SEL/RESET
BUTTON
CONTINUED
Multi-Information Display
113
Instruments and Controls
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
To Next Page
Loading...
