The knob on the instrument panel
controls the brightness of the instru-
ment panel lights. Turn the knob to
adjust the brightness.
Separate adjustments can be made
when the headlights are on and off.
To reduce glare at night, the
instrument panel illumination dims
when you turn the light switch to the
or position.
You will hear a beep when maximum
or minimum brightness is reached.
You will also hear a beep when the
maximum level is canceled by
turning the knob a click to the left.
The level of brightness is shown on
the multi-information display while
you adjust it. It goes out 5 seconds
after you finish adjusting.
Instrument Panel Brightness
Instruments and Controls
117
INSTRUMENT PANEL BRIGHTNESS
CONTROL KNOB
U.S. model is shown.
０８／０４／１１ １９：３４：５５ ３１ＳＴＫ６２０ ０１２２
To Next Page
Loading...
