−
−＋
The current setting is also shown on
the upper display.
The system will automatically return
the display to the selected audio
mode about 5 seconds after you stop
adjusting a mode.
To adjust bass
and treble, select BASS or TREBLE,
andpressENTERontheinterface
selector. The current setting is
shown on the audio control display.
Turn the interface dial to the desired
level ( 6 to 6), and enter your
selection by pressing ENTER.
BASS/TREBLE
Audio System
218
CURRENT SETTING
CURRENT SETTING
０８／０４／１１ １８：３１：３０ ３１ＳＴＫ６２０ ０２２３
To Next Page
Loading...
