▲
▼
To change the display, press the
SEL/RESET button or INFO ( /
)buttononthesteeringwheel
repeatedly until the desired
information appears (see page ).
You can also change the display by
pressing the select/reset knob in the
instrument panel.
When you turn the ignition switch to
the ON (II) position, your last
selection is displayed.
In the multi-information display, the
system message is also displayed
(see page ) and you can
customize your vehicle control
settings (see page ).
The multi-information display in the
instrument panel displays various
information and messages when the
ignition switch is in the ON (II)
position. Some of the messages help
you operate your vehicle more
comfortably. Others help to keep
you aware of the periodic
maintenance your vehicle needs for
continued trouble-free driving.
When you open the driver’s door, a
‘‘Welcome’’ message is shown on the
multi-information display. When you
turn the ignition switch from the ON
(II) position to the ACCESSORY (I)
position, a ‘‘Goodbye’’ message is
shownonthedisplay. 73
77
80
Multi-Information Display
72
SEL/RESET
BUTTON
INFO BUTTONS
０８／０４／１１ １８：１２：１６ ３１ＳＴＫ６２０ ００７７
To Next Page
Loading...
