5. Remove the tools, wing bolt and
the jack. To remove the jack, turn
the jack's end bracket
counterclockwise to loosen it.
6. Loosen the five wheel nuts 1/2
turn with the wheel nut wrench.
7. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
WING BOLT for normal tire
JACK
TOOLS
WHEEL NUTS
WHEEL NUTS
WHEEL NUT WRENCH JACKING POINT
Changing a Flat Tire
456
10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu
To Next Page
Loading...
