The component parts in the engine
compartment are protected by
several covers. You may need to
remove the covers when you
perform some simple maintenance
work.
When reinstalling the covers, make
sure the pins and tabs are in their
proper positions.
To remove the covers:
Remove the right and left engine
compartment covers by sliding
them apart.
Pull the bulkhead cover straight
uptoremove.Whenremovingthe
cover, make sure to move the
bulkhead cover slightly to the left
so that the hood latch handle does
not get in the way.
After replacing the right engine
compartment cover, make sure the
washer fluid cap is firmly in place.
1.
2.
Engine Compartment Covers
508
RIGHT ENGINE COMPARTMENT
COVER
BULKHEAD COVER
LEFT ENGINE COMPARTMENT COVER
10/07/29 12:46:57 31TK4620_513
To Next Page
Loading...
