10 11
1514
M a k i n g a C a l l
Press and release the HFL Talk button before you give a command.
1. Say “Call” and the phone
number.
2. Say “Call” or “Dial” to
begin the call.
3. The call is connected and
heard through the
speakers.
R e c e i v i n g a C a l l
2. Press the HFL Talk button to
accept the call.
3. Press the HFL Back button to
decline or end the call.
H F L P h o n e b o o k
Press and release the HFL Talk button before you give a command.
1. Say “Phonebook.”
Store up to 50 names and their phone numbers, which can be used as speed dials.
2. Say “Store.”
3. Say the name of the
contact, and then the
phone number.
4. To call a contact once an
entry is stored, say “Call
Mike.”
1. A notification is heard, and
“INCOMING CALL” and the phone
number appear on the MID.
13 MDX ATG_Base:ATG_NEW STYLE 7/3/2012 10:57 AM Page 9
To Next Page
Loading...
