Indicators
Indicator Name On/Blinking Explanation Message
Parking Brake
and Brake
System Indicator
(Red)
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off if the parking brake
has been released.
●
Comes on when the parking brake
is applied, and goes off when it is
released.
●
Comes on when the brake fluid
level is low.
●
Comes on if there is a problem with
the brake system.
●
The beeper sounds and the
indicator comes on if you drive with
the parking brake not fully released.
●
Comes on while driving - Make sure the
parking brake is released. Check the brake
fluid level.
2 What to do when the indicator comes
on while driving P. 337
●
Comes on along with the ABS indicator
- Have the vehicle checked by a dealer.
2 If the Brake System Indicator (Red)
Comes On P. 337
Brake System
Indicator
(Amber)
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off.
●
Comes on if there is a problem with
hydraulic brake boost system.
●
Stays on constantly - Have the vehicle
checked by a dealer.
To Next Page
Loading...
