Controls (P107)
Clock
(P108)
The navigation system receives signals from
GPS satellites, updating the clock
automatically.
You can also adjust the time manually.
a
Enter the Clock Adjustment screen.
2 Adjusting the Clock (P108)
b
Rotate to change hour, then press
.
c
Rotate to change minute, then
press .
Models with navigation system
Models without navigation system
a
Press the CLOCK (AUX) button until the
displayed time begins flashing.
b
Press Preset (4 (Hour) or (5 (Minute)
to set the time. Press Preset
(6 (Reset)
to set the time to the nearest hour.
c
Press the CLOCK button again to set
the time.
ENGINE START/STOP
Button
(P133)
Press the button to change the vehicle’s
power mode.
Turn Signals
(P136)
Lights
(P136)
Turn Signal Control Lever
Right
Left
Light Control Switches
Low Beam
High Beam
Flashing
* Not available on all models
16 ACURA ILX-31TX66300.book 11 ページ 2014年12月22日 月曜日 午後10時15分