*1:On the left: Models without full color display
On the right: Models with full color display
Indicator Name On/Blinking Explanation Message
*1
Low Oil Pressure
Indicator
●
Comes on when you set the power
mode to ON, and goes off when the
engine starts.
●
Comes on when the engine oil
pressure is low.
●
Comes on while driving -
Immediately stop in a safe place.
2 If the Low Oil Pressure
Indicator Comes On P. 416
Malfunction
Indicator Lamp
●
Comes on when you set the power
mode to ON, and goes off either when
the engine starts or after several
seconds if the engine does not start. If
“readiness codes” have not been set,
it blinks five times before it goes off.
●
Comes on if there is a problem with
the emissions control system.
●
Blinks when a misfire in the engine’s
cylinders is detected.
●
Readiness codes are part of the
on board diagnostics for the
emissions control systems.
2 Testing of Readiness Codes
P. 431
●
Comes on while driving - Have
the vehicle checked by a dealer.
●
Blinks while driving - Stop in a
safe place where there are no
flammable objects. Stop the
engine for 10 minutes or more,
and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator
Lamp Comes On or Blinks
P. 417
To Next Page
Loading...
