Acura 3.2 TL 2003 - Mirrors; Adjusting the Power Mirrors

Adjust the outside mirrors with the
adjustment switch on the driver’s
door armrest:
Turn the ignition switch ON (II).
Move the selector switch to L
(driver’s side) or R (passenger’s
side).
Keeptheinsideandoutsidemirrors
clean and adjusted for best visibility.
Be sure to adjust the mirrors before
you start driving.
The inside mirror can automatically
darken to reduce glare. To turn on
this feature, press the button on the
bottom of the mirror. The AUTO
indicator comes on as a reminder.
When it is on, the mirror darkens
when it senses the headlights of a
vehicle behind you, then returns to
normal visibility when the lights are
gone. Press the button again to turn
off this sensing.
1.
2.
Instruments and Controls
Mirrors
Adjusting the Power Mirrors
94
SSEELLEECCTTOORR SSWWIITTCCHH
SSEENNSSOORR
IINNDDIICCAATTOORR
AAUUTTOO BBUUTTTTOONN
IINNDDIICCAATTOORR
WWiitthh OOnnSSttaarr
WWiitthhoouutt OOnnSSttaarr
AAUUTTOO BBUUTTTTOONN
SSEENNSSOORR
０１／１２／２４ １１：４５：０３ ３１Ｓ０Ｋ６４０ ００９７