Need help?Do you have a question about the Acura Integra 1988 and is the answer not in the manual?
General| Brand | Acura |
|---|---|
| Model | Integra 1988 |
| Category | Automobile |
| Language | English |
Details warning and danger labels related to the driver's airbag module and its components.
Provides technical standards and service limits for various vehicle components.
Technical specifications for cylinder head, camshaft, valves, and springs for the B18B1 engine.
Details on cylinder block, piston, rings, crankshaft, and bearings for the B18B1 engine.
Technical specifications for cylinder head, camshaft, valves, and springs for the B18C1 engine.
Details on cylinder block, piston, rings, crankshaft, and bearings for the B18C1 engine.
Specifications for engine oil capacity, oil pump clearances, and relief valve settings.
Details on coolant capacity, radiator cap pressure, and thermostat operating temperatures.
Specifications for fuel pump, pressure regulator, fuel tank capacity, and engine idle settings.
Details on mainshaft, countershaft, and spacer collar dimensions, end play, and clearances.
Details on ATF capacity, hydraulic pressure, and stall speed for automatic transmissions.
Specifications for automatic transmission clutch clearance, springs, and plate thicknesses.
Details on differential carrier, pinion gear, backlash, and clearance specifications.
Covers engine type, bore, stroke, displacement, compression ratio, and lubrication system.
Details gear ratios, final reduction, and types for both manual and automatic transmissions.
Lists recommended lubricants for the engine, manual and automatic transmissions, and brake lines.
Details lubricants for clutch, gearbox, throttle wires, hinges, calipers, and other chassis points.
To Next Page
