To get into the third row seats, pull
uptheleveronthesideofthe
passenger’s side second row seat-
back. The seat-back will tilt forward,
and the seat will slide forward.
After you return the seat-back to the
upright position, push the whole seat
backwards until it latches. Make
sure the seat is fully latched before
sitting in it.
The left and right halves of the
second seat can be folded up
separately to create more cargo
space.
If you are folding the left half of
the seat, use the ignition key to
release the center seat belt from
the detachable anchor. Allow the
seat belt to retract into the roof.
Insert the latch plate into the roof
holder.
Fold the seat-back forward.
Reverse this procedure to return the
seat to the upright position. Make
sure the seat is locked securely
before driving.
(Left half) Remove the center seat
belt from its holder in the roof, and
connect it to the detachable anchor
(see page ).
Pull up the handle on the outside
of the seat-back.
Lower the head restraint to its
lowest position.
2.
3.
1.
4.
109
Rear Seat Access Folding the Second Seat
Seats
Instruments and Controls
106
RELEASE LEVER
HANDLE
０２／０７／３０ ２１：３９：５６ ３１Ｓ３Ｖ６２０ ０１１１
To Next Page
Loading...
