Replacing Front Fog/Daytime
Running Light Bulbs
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the
glass can cause the bulb to overheat
and shatter.
1. Remove the bolt and use the flat-
tip screwdriver to remove the
holding clips located under the
front bumper.
2. Push down the inner fender.
SIDE MARKER LIGHT
BULB
SOCKET
BOLT
HOLDING
CLIPS
CONTINUED
Lights
405
Maintena nce
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
To Next Page
Loading...
