Acura MDX 2011 User Manual

2. Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
3. Tighten the strap according to the
seat maker's instructions.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
Third Row Installation
Each third row seat has a tether
anchorage point on the tailgate sill.
1. Select the anchor point you want to
use. Then open the anchor cover
with a small flat-tip screwdriver.
2. Secure the child seat in the
desired position (see page 53).
3. Remove the head restraint, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
Make sure the removed head
restraint is secured in a safe place.
4. Tighten the strap according to the
seat maker's instructions.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
Installing a Child Seat
56
11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu

Acura MDX 2011 Specifications

General

Brand	Acura
Model	MDX 2011
Category	Automobile
Language	English