Audio Error Messages
CD Player
If a disc error occurs, you may see the following error messages.
Error Message Cause Solution
Unplayable File Track/file format not supported
●
Current track/file will be skipped. The next supported track/file
plays automatically.
Bad Disc
Please Check Owner’s
Manual
Push Eject
Mechanical error
●
Press the (eject) button and remove the disc, and check that the
error message is cleared.
●
Check that the disc is not damaged or deformed, and insert the
disc again.
2 Protecting CDs P. 283
●
If the error message reappears, press the button, and pull out
the disc.
●
Insert a different disc.
If the new disc plays, there is a problem with the first disc.
●
If the error message repeats, or the disc cannot be removed,
contact a dealer.
Do not try to force the disc out of the player.
Mecha Error
Bad Disc
Please Check Owner’s
Manual
Servo error
Check Disc Disc error
●
Check that the disc is not damaged or deformed.
2 Protecting CDs P. 283
Heat Error High temperature
●
Turn the audio system off and allow the player to cool down until
the error message is cleared.
17 ACURA MDX-31TZ56300.book 276 ページ ２０１６年１０月２５日 火曜日 午後２時２７分
To Next Page
Loading...
