Indicator Name On/Blinking Explanation Message
Blind spot
information (BSI)
Indicator
●
Comes on for a few seconds
when you set the power mode to
ON, then goes off.
●
Stays on while BSI is turned off.
—
●
Comes on when mud, snow, or
ice accumulates in the vicinity of
sensor.
●
Comes on while driving - Remove the
obstacle in the vicinity of sensor.
2 Blind spot information (BSI) System
*
P. 421
●
Comes on if there is a problem
with the system.
●
Comes on while driving - Have your vehicle
checked by a dealer.
To Next Page
Loading...
