Changing a Flat Tire
4. As the tire deflates, it will fold
back to its original shape. When
the air stops coming out of the tire,
use the notch on the valve cap to
tighten the valve core.
5. Put the rubber cap back on the
valve cap. Screw the valve cap
back on the folding spare tire
valve.
6. Remove the folding spare tire and
install the original tire and wheel
nuts. Lower the car and tighten
the wheel nuts securely in a criss-
cross pattern. Tighten to:
80 lbf
.
ft (108 N
.
m , 11 kgf
.
m)
Taking Care of the Unexpected
VALVE CAP
To Next Page
Loading...
