552
uuReplacing Light BulbsuRear Turn Signal Light Bulbs
Rear Turn Signal Light Bulbs
When replacing, use the following bulbs.
1. Remove the cover by prying on the edge
using a flat-tip screwdriver.
u Wrap the flat-tip screwdriver with a cloth
to prevent scratches.
2. Use a Phillips-head screwdriver to remove
the bolts.
3. Pull the light assembly out of the rear pillar.
Rear Turn Signal Light: 21 W (PY21W Amber/Silver)
20 ACURA RDX-31TJB6111.book 552 ページ ２０２０年２月１１日 火曜日 午後２時６分
To Next Page
Loading...
