Turn the ignition switch as you
would if a key were inserted.
8
K E Y L E S S R E M O T E A C C E S S
Operate certain functions of your vehicle by simply having the remote within
operating range.
To unlock, grab either one of the
front door handles.
To lock, touch the door lock
sensor on either front door
handle.
S t a r t i n g t h e E n g i n e
O p e n i n g t h e T r u n k
U n l o c k i n g / L o c k i n g t h e D o o r s
9
K E Y L E S S M E M O R Y S E T T I N G S
When linked, each remote (labeled 1 or 2 on the back) activates its own set of
programmable driving position memory and customized settings (MID).
Press the trunk release switch.
2. Check the MID:
• If you have the correct remote, the driver ID that first appears on
the MID will match the ID number on the back of your remote.
Go to step 3.
• If the numbers do not match, follow these simple instructions:
- Turn the ignition switch to LOCK (0).
- Press the unlock button on your remote.
- Turn the ignition switch to ON (II), and check the MID. The driver
ID that first appears on the MID should now match the number
on the back of your remote.
1. Verify that you are using the correct remote by turning the ignition
switch to ON (II).
R e m o t e V e r i f i c a t i o n
3. Once you have the correct remote, you can begin to program your
Keyless Memory Settings.
To Next Page
Loading...
