Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Testthelightstomakesurethe
new bulb is working.
Install the light assembly cover.
Make sure it locks in place.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Remove the socket by turning it
one-quarter turn counterclockwise.
Determinewhichofthefivebulbs
is burned out: brake/taillight, turn
signal light, side marker light,
back-up light, or taillight.
2.
3.
4.
5.
6.
7.
Lights
Maintenance
179
０３／０７／２２ １９：１０：１４ ３１Ｓ６Ｍ６２０ ０１８２
To Next Page
Loading...
