uuIf a Tire Goes FlatuChanging a Flat Tire
536
3. Raise the vehicle, using the jack handle bar
and the jack handle, until the tire is off the
ground.
1. Remove the wheel nuts and flat tire.
2. Wipe the mounting surfaces of the wheel
with a clean cloth.
3. Mount the compact spare tire.
4. Screw the wheel nuts until they touch the
lips around the mounting holes, then stop
rotating.
Jack
Handle
Bar
Wheel Nut
Wrench as Jack Handle
■
Replacing the Flat Tire
1Replacing the Flat Tire
Do not over tighten the wheel nuts by applying extra
torque using your foot or a pipe.
20 ACURA TLX-31TZ36500.book 536 ページ ２０１９年２月７日 木曜日 午後２時２分
To Next Page
Loading...
