Need help?Do you have a question about the Adam Equipment GK and is the answer not in the manual?
General| Brand | Adam Equipment |
|---|---|
| Model | GK |
| Category | Touch Panel |
| Language | English |
Explains symbols on the LCD for zero, stability, net weight, units, capacity, battery, and mode indicators.
Describes how to set the zero point for accurate weighing and the auto re-zeroing function.
Explains manual and preset taring procedures to determine net weight by subtracting container weights.
Details the standard weighing process, including taring and changing units.
Guides users on using the indicator for counting identical items based on average piece weight.
Explains setting high/low limits for check-weighing, with LED and audible indicators.
Covers storing and recalling up to 10 sets of check-weighing limits and associated settings.
Details the percent weighing function, where a reference weight is set as 100%.
Describes the animal weighing mode, which uses a filter for unstable items.
Explains how to manually or automatically accumulate weights and retrieve the total.
Lists the specific commands that can be sent to the indicator via RS-232 for control and operation.
Details parameters for customizing check-weighing, including limit locks, passwords, and LED/beeper settings.
Covers parameters for RS-232 setup like language selection, baud rate, and ID settings.
Describes parameters controlling the indicator's general operation, such as units, backlight, and auto-off.
Explains parameters specific to Percent Weighing and Animal Weighing modes, like filter settings.
Explains how to gain access to parameters using passcodes or jumpers on approved and non-approved indicators.
Details the procedure to enter service parameters using code '2006' and lists available parameter groups like CAL, DEC, CAP.
Section for recording user company contact information for service support.
Section to record specific indicator model, serial number, and purchase details for service.
Guidance on how to describe the issue encountered with the indicator for effective troubleshooting.
To Next Page
