The device can be used with the provided charger or
with any powered USB port, for example on your
PC.
2. When connected to a 12V/24V in-car outlet:
Set the device to“1 minute/3 minutes/5 minutes”
recording time to auto-start recording when the car
engine is turned on. Recording stops automatically
and content is saved when you turn the ignition off
Caution: the provided power supply converts 12V/24V
in-car output to 5V input to the device. Using other
chargers or any input greater than 5V to the device may
cause the drive recorder to fail due to burnout
3. Installing and removing memory cards
[1] Only insert memory cards in the direction
indicated by the card manufacturer. Improper
insertion may damage the device and the card.
To Next Page
Loading...