This may be due to a file error. If rebooting does not
resolve this, the storage card needs to be reformatted
◎No image when outputting to a high definition TV or
monitor
Check that all cables are properly connected and
secured, and that the TV is set to the correct source
(AV, HDMI, etc.)
◎Images appear blurry or hazy
Make sure the lens is clean- wipe it with a soft cloth.
Also make sure the windshield is clean inside out
◎Images have vertical and/or horizontal interference
lines
This is caused by selecting an incorrect refresh rate.
Adjust the device to 50Hz (frames per second) or 60Hz
(frames per second)
To Next Page
Loading...