16
energized.
Once the temperature of the heatsinks drops to a safe operating level, the amplifier will
automatically return to operation.
If the amplifier ceases to operate and both the POWER LED and the THERMAL
PROTECTION LED are off, the condition may indicate that the AC LINE FUSE has blown.
Please refer to the section AC LINE FUSE for instructions on replacing this fuse.
ACTIVATION OF THE THERMAL PROTECTION CIRCUITRY IN THE GFA-575se IS AN
INDICATION THAT THE AMPLIFIER HAS BEEN OVERDRIVEN OR THAT THE LOAD
THE LOUDSPEAKERS ARE PRESENTING TO THE AMPLIFIER IS UNREASONABLY
LOW. IF YOU WISH TO PREVENT RECURRENT ACTIVATION OF THE THERMAL
PROTECTION CIRCUITRY, YOU MUST REDUCE THE VOLUME LEVEL DEMANDS,
RECTIFY THE LOAD-IMPEDANCE CONDITION WHICH MAY BE CAUSING
ACTIVATION OF THIS CIRCUITRY, INSTALL AN AUXILIARY FAN OPTION OR, IN
EXTREME CASES, UNDERTAKE ALL THREE.
CARING FOR YOUR GFA-575se
Great care has been taken by ADCOM to assure that your amplifier is as flawless in
appearance as it is electronically. The front panel is a heavy- gauge, high-grade aluminum
extrusion carefully finished and anodized for durability. The chassis, top cover and rear
panel are of heavy-gauge steel, both painted and baked. If the front panel, top or sides
should become dusty or fingerprinted, they can be cleaned with a soft Iintless cloth, slightly
dampened with a very mild detergent solution or non-ammonia glass cleaner.
DO NOT SPRAY OR USE LIQUIDS OF ANY KIND ON THE SURFACES OF THE
GFA-575se. DO NOT EXPOSE THE AMPLIFIER TO RAIN, WATER OR MOISTURE OF
ANY KIND.
To Next Page
Loading...
Need help?
General