Need help?Do you have a question about the Addie Water Systems 2500 and is the answer not in the manual?
How to set the days for water conditioner regeneration using the skipper wheel.
Procedure to set the current time of day on the water conditioner timer.
Instructions on how to manually initiate a regeneration cycle at any time.
Modifying backwash duration by adjusting program wheel pins (2 min/pin).
Changing brine and slow rinse duration using program wheel holes (2 min/hole).
Setting rapid rinse and brine tank refill times with program wheel pins (2 min/pin).
Setting rapid rinse duration by adjusting program wheel pins (2 min/pin).
Setting brine tank refill duration using program wheel holes (2 min/hole).
Illustrates water flow during the service operational state of the unit.
Illustrates water flow during the backwash operational state of the unit.
Illustrates water flow during the brine operational state of the unit.
Illustrates water flow during the slow rinse operational state of the unit.
Illustrates water flow during rapid rinse and brine tank fill states.
Illustrates water flow during the rapid rinse operational state of the unit.
Illustrates water flow during the brine tank fill operational state.
General| Power Source | Electric |
|---|---|
| Type | Water Dispenser |
| Capacity | 2.5 gallons |
| Material | Plastic |
| Dispensing Options | Hot and Cold |
| Voltage | 120V |
| Wattage | 100W |
To Next Page
