To Next PageTo Next Page
Need help?Do you have a question about the AddPac VoiceFinder AP2120 and is the answer not in the manual?
Details the AP2120 VoIP Gateway's features, benefits, and target applications.
Highlights key hardware and software features of the AP2120 VoIP Gateway.
Instructions for checking the package contents and handling potential damage.
Details the front and rear panel components and their functions.
Describes the standard Ethernet and serial interfaces for LAN, WAN, and console.
Explains the optional FXS, FXO, and E&M interface modules for voice service.
Provides safety recommendations for electrical and general installation.
Step-by-step guide for installing the gateway, including console connection and power.
Details on configuring network parameters, IP addresses, and protocols.
Describes the sequence of operations during gateway startup.
Explains command usage, modes, and general features like help and history.
Guides the initial setup process for the gateway configuration mode.
Details basic Ethernet configuration, including IP addressing and encapsulation.
Covers static, RIP, and OSPF routing protocols and their configuration.
Explains how to create and apply standard and extended access lists for traffic control.
Details Network Address Translation for IP address management and security.
Guides the setup of DHCP server and relay functions for IP address allocation.
Explains configuring transparent bridging for Ethernet and serial ports.
Covers queuing methods (FCFS, WFQ, Priority, Custom) for traffic prioritization.
Details configuring SNMP for network management and monitoring.
Lists commands for managing the gateway in EXEC and Global modes.
Introduces Voice over IP, codecs, and MOS for voice quality.
Details configuring Ethernet interfaces for VoIP service.
Covers planning numbers, handling, and configuring dial peers for voice calls.
Details configuring FXS, FXO, and E&M voice ports and their parameters.
Explains T.38 FAX Relay configuration using VoIP H.323 and bypass settings.
Covers H.323 gateway setup, call start modes, and user classes.
Lists general VoIP configuration commands for clear, configure, dial-peer, etc.
Covers global commands like dial-peer hunt, ipaddr-prefix, terminator, voice-class.
Details commands for voice ports: comfort-noise, connection, description, echo-cancel.
Lists commands for dial peers: answer-address, codec, description, destination-pattern.
Covers commands for gateway, voice service, codec, counter, discovery, fax, and more.
Includes commands like clear, show call, debug, and version for system management.
General